iCircuit1.16 - App Store

Bitte warten ... Die Verfügbarkeit der App-Liste wird überprüft.
Sie können Ergebnisse sehen in einige Sekunden.


Herausgeberbeschreibung

iCircuit ist die führende iPhone- und iPad-App zum Entwerfen, Simulieren und Lernen analoger und digitaler Elektronik. Die fortschrittliche Simulations-Engine analysiert deine Schaltungen in Echtzeit und ohne Unterbrechung – deine Schaltungen stehen immer unter Strom, genau wie beim Arbeiten mit echten Bauteilen.

Nutze iCircuit wie ein CAD-Programm: Bauteile hinzufügen, verdrahten, Eigenschaften einstellen. Doch anders als typische CAD-Apps simuliert iCircuit permanent. Du musst nicht anhalten, um zu messen, und keine Berichte konfigurieren – du experimentierst einfach mit deiner Schaltung, bei eingeschaltetem Strom.

Baue Schaltungen mit über 300 Bauteilen – von einfachen Widerständen und LEDs bis zu programmierbaren Arduinos (Uno, Nano, Mega, ESP8266, ESP32), PIC-Mikrocontrollern und 60 Digital-ICs der 4000er/7400er-Reihe (mehr mit Pro). Elemente verbinden, Werte anpassen und sofort das Ergebnis sehen.

INTEGRIERTE MESSGERÄTE
• Multimeter: Spannung, Strom und Leistung an jedem Punkt messen
• Oszilloskop: Mehrere Signale verfolgen, mit Touch-gesteuerter Zeitbasis, gestapelten/ungestapelten Ansichten, FFT-Analyse und Bode-Diagrammen
• Anzeigen: Spannungen, Ströme und Frequenzen direkt in der Schaltung visualisieren
• Signalgeneratoren und konfigurierbare Quellen

UMFANGREICHE BAUTEIL-BIBLIOTHEK
• Programmierbare Arduinos (Uno, Nano, Mega, ESP8266, ESP32)
• Programmierbare PIC-Mikrocontroller (Assembler- und HEX-Dateien, mehr mit Pro)
• Stromversorgung: Spannungsregler (78xx, LM317), Quellen, gesteuerte Quellen, Hohlstecker-Buchsen und simulierte Antennen
• Analog: Widerstände, Kondensatoren, Spulen, Dioden, Bipolartransistoren, MOSFETs, Thermistoren, Trioden und Tetroden
• Digital: Logikgatter (AND, OR, NAND, NOR, XOR), JK- und D-Flipflops sowie 60 ICs der 4000er/7400er-Reihe (180+ mit Pro)
• ADCs und DACs
• Sensoren und Anzeigen: LEDs, 7-Segment-Anzeigen, NeoPixel, Matrix-Displays, Thermistoren
• Elektromechanik: Motoren, Servos, Schalter (SPST/SPDT, DPST/DPDT), Taster, Relais und Lautsprecher

EIGENE BAUTEILE ERSTELLEN
Erstelle Teilschaltungen und eigene Bauteile, um deine Designs zu modularisieren und wiederverwendbare Module zu bauen. Teile deine Bauteile über die iCircuit Gallery mit anderen.

AUDIO-SIMULATION
Höre deine Schaltungen. Lautsprecher, Summer und Mikrofone erzeugen echten Ton.

Perfekt für Studierende und Auszubildende, Bastler beim Prototyping und Ingenieure bei der Design-Validierung – ganz ohne ein einziges durchgebranntes Bauteil.

ÜBER ICIRCUIT PRO (OPTIONAL)
iCircuit ist eine vollständige App mit Einmalkauf. iCircuit Pro ist optional, ergänzt zusätzliche Bauteile (u. a. weitere PICs und eine größere 4000er/7400er-IC-Bibliothek) und unterstützt die Weiterentwicklung. Für die Kernsimulation und den Schaltungsentwurf im Alltag ist Pro nicht erforderlich.

Nutzungsbedingungen: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/



Über iCircuit

iCircuit ist eine paid App für iOS, veröffentlicht in der App-Liste Teaching & Training Tools, die Teil von Education ist.

Das Unternehmen, das iCircuit entwickelt, ist Krueger Systems, Inc.. Die neueste vom Entwickler veröffentlichte Version ist 1.16.

Um iCircuit auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-10-12 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann iCircuit als Malware erkennen, wenn der Download-Link defekt ist.

So installieren Sie iCircuit auf Ihrem iOS-Gerät:

  • Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
  • Sobald iCircuit im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
  • Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
  • Nachdem iCircuit heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
  • Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.

Programmdetails


Allgemein

Herausgeber
Veröffentlichungsdatum
2026-10-12
Sprachen
German

Kategorie

Kategorie
Unterkategorie

Systemanforderungen

Betriebssysteme
iOS

Download-Informationen

Dateigröße
196.4 MB
Gesamtdownloads
0

Preisgestaltung

Lizenzmodell
Paid
Preis

Versionsgeschichte


Hier finden Sie das Changelog von iCircuit, seit es am 2026-11-01 auf unserer Website veröffentlicht wurde.Die neueste Version ist 1.16 und wurde am 16 November, 2026 auf Apps112 aktualisiert.Sehen Sie unten die Änderungen in jeder Version:

Version 1.16

veröffentlicht am 2026-10-12

iCircuit 1.16 ist das größte Update seit Jahren: echte SPICE-Subcircuits, Verilog- und VHDL-Simulation sowie vollständig emulierte Raspberry-Pi-Pico-Boards mit originalem MicroPython und CircuitPython – alles im selben Echtzeit-Simulator, den du bereits kennst.

RASPBERRY PI PICO & PICO 2, VOLLSTÄNDIG EMULIERT
Setz einen Raspberry Pi Pico oder Pico 2 in deine Schaltung und schreib Python! iCircuit startet echte MicroPython-1.28- und CircuitPython-10.2-Firmware auf Emulationen der RP2040- und RP2350-Prozessoren auf Maschinenebene – die Firmware ist pro Board wählbar.
• Python direkt in der App: Editor mit Syntaxhervorhebung, Fehlerprüfung beim Schreiben und Projekten mit mehreren Dateien
• Interaktive serielle Konsole mit Serial Plotter
• Echte Tracebacks mit Datei- und Zeilennummer, genau wie auf der Hardware
• GPIO, PWM, ADC sowie I2C-, SPI- und UART-Busse arbeiten in Echtzeit mit deiner Schaltung zusammen
• Beschriftete Pin-Funktionen, On-Board-LED und emulierte Taktfrequenz im Infobereich

SPICE-SUBCIRCUITS
Importiere SPICE-Modelle nach Industriestandard als vollwertige Schaltungselemente:
• Transistoren und Dioden mit .MODEL-Karten: BJTs, MOSFETs und BJTs mit mehreren Emittern
• Alle gesteuerten Quellen (E, F, G, H) sowie unabhängige Spannungs- und Stromquellen mit Standard-Signalformen
• Verschachtelte Subcircuits mit Parametern
• Gekoppelte Induktivitäten (K)
• Direktiven .INCLUDE, .IC und .TEMP; Analysebefehle werden sauber behandelt
• Robuster Parser mit klaren Fehlermeldungen
Lade das SPICE-Modell eines Herstellers aus dem Netz und simuliere es direkt in iCircuit.

VERILOG UND VHDL
Das neue HDL-Element kompiliert und simuliert synthetisierbares Verilog und VHDL in Echtzeit. Entwirf Zähler, Zustandsautomaten oder Glue-Logic in der Sprache, die du im Beruf oder Studium verwendest, verbinde sie mit LEDs, Schaltern und deiner analogen Schaltung – und sieh zu, wie sie läuft.

NEUE ELEMENTE
• I2C-Sensoren: HDC1080 (Luftfeuchte), MLX90614 (IR-Thermometer), DS1307/DS3231 (Echtzeituhren), ADS1115 (16-Bit-ADC) – direkt aus Python auslesbar
• AC-Stromquelle, Ein-Aus-Ein-Schalter, BJTs mit mehreren Emittern und OB2512RN-Leistungsschalter
• 74138, 74139, 7483, 74107 und 74245 jetzt im Standard-Set
• Verbesserte Hohlstecker- und TRS-Buchsen

ARDUINO
• SSD1306-OLED-Displays mit Adafruit_SSD1306 und Adafruit_GFX ansteuern
• Sketches in externen Dateien speichern und zwischen Schaltungen teilen
• Sketches für echte Hardware exportieren
• Konsolengröße einstellen und Werte aus dem Sketch plotten

EDITOR UND ANALYSE (iPhone, iPad und Mac)
• Rechteckauswahl
• Elemente lösen, ohne Leitungen von Hand zu löschen
• Die Arbeitsfläche wächst automatisch, wenn du Elemente am Rand ablegst
• Leitungen und Elemente farbig markieren
• Hilfetext zu jeder Eigenschaft im Inspektor
• Tasten auf Taster legen und die Schaltung wie ein Instrument spielen
• XY-Modus für Lissajous-Figuren und Kennlinien
• FFT-Export
• Stückliste (BOM) als CSV, kompatibel mit der Bauteilsuche von EasyEDA/JLCPCB

FEHLERBEHEBUNGEN
• Inverter-Werte beim Export, ein Absturz bei Netzlabels und das Zuschneiden eigener ICs behoben
• Genauere Leistungswarnungen für Bauteile
• Realistischeres Verhalten von I2C- und SPI-Bussen
• Viele Korrekturen an SPICE, HDL und Simulation, abgesichert durch 775 automatisierte Schaltungstests

FLÜSSIGERES BEARBEITEN
• Wiederholen ist nur einen langen Druck entfernt: Halte einfach die Widerrufen-Taste gedrückt
• Apple Pencil funktioniert jetzt überall, wo dein Finger funktioniert

Vielen Dank für deine Unterstützung! Ob du Elektronik lernst, unterrichtest, ein Produkt entwickelst oder einfach Spaß hast – wir hoffen, dass iCircuit mit v1.16 noch nützlicher für dich wird.

Version 1.16

veröffentlicht am 2026-10-15

Version History iCircuit 1.16 is the biggest update in years: real SPICE subcircuits, Verilog and VHDL simulation, and fully emulated Raspberry Pi Pico boards running genuine MicroPython and CircuitPython, all in the same real-time simulator you already know.

RASPBERRY PI PICO & PICO 2, FULLY EMULATED
Drop a Raspberry Pi Pico or Pico 2 into your circuit and write Python! iCircuit boots real MicroPython 1.28 and CircuitPython 10.2 firmware on machine-level emulations of the RP2040 and RP2350 processors, your choice of firmware per board.
• Write Python right in the app: syntax-highlighted editor with edit-time error checking and multi-file projects
• Interactive serial console with a Serial Plotter running alongside
• Real tracebacks with actual file and line numbers, just like on hardware
• GPIO, PWM, ADC, and I2C/SPI/UART buses interact with the rest of your circuit in real time
• Labeled pin roles, on-board LED, and effective emulated clock speed in the info panel

SPICE SUBCIRCUITS
Import industry-standard SPICE models and use them as first-class circuit elements:
• Transistors and diodes with .MODEL cards: BJTs, MOSFETs, and multi-emitter BJTs
• All dependent sources (E, F, G, H) and independent V/I sources with standard waveforms
• Nested subcircuits with parameters
• Coupled inductors (K mutual inductance)
• .INCLUDE, .IC, and .TEMP directives, with graceful handling of analysis commands
• Robust, case-insensitive parsing with clear error messages
Grab a vendor's SPICE model off the web and simulate it right in iCircuit.

VERILOG AND VHDL
The new HDL element compiles and simulates synthesizable Verilog and VHDL in real time. Design a counter, a state machine, or glue logic in the language you use at work or school, wire it to LEDs, switches, and the rest of your analog circuit, and watch it run.

NEW ELEMENTS
• I2C sensors: HDC1080 humidity, MLX90614 IR thermometer, DS1307/DS3231 real-time clocks, ADS1115 16-bit ADC, readable straight from Python
• AC Current Source, On-Off-On Switch, multiple-emitter BJTs, and OB2512RN offline PSR power switch
• 74138, 74139, 7483, 74107, and 74245 added to the Standard set
• Better power jacks and TRS jacks

ARDUINO
• Drive SSD1306 OLED displays with the Adafruit_SSD1306 and Adafruit_GFX libraries
• Keep sketches in external script files and share them between circuits
• Export sketches to use on real hardware
• Configurable console size and plotting from your sketch

EDITOR AND ANALYSIS (iPhone, iPad, and Mac)
• Rectangular selection
• Disconnect an element without deleting wires by hand
• The canvas grows automatically when you drop elements near the edge
• Color-code wires and elements
• Help text for every property in the Inspector
• Assign keys to momentary switches and play your circuit like an instrument
• XY scope mode for Lissajous figures and I/V curves
• FFT export
• Parts List (BOM) export as CSV, compatible with EasyEDA/JLCPCB part search

BUG FIXES
• Fixed inverter values when exporting, a crash in net labeling, and custom IC drawing clipping
• More accurate component power warnings
• More realistic I2C and SPI bus behavior
• Many SPICE, HDL, and simulation correctness fixes, validated by 775 automated circuit tests

SMOOTHER EDITING
• Redo is one long-press away: just hold the Undo button
• Apple Pencil now works everywhere your finger does

Thank you for your continued support! Whether you're learning electronics, teaching a class, prototyping a product, or just having fun, we hope v1.16 makes iCircuit more useful than ever. 1.16 2d ago This small update fixes signing into the iCircuit Gallery to upload custom elements and fixes the link to the iCircuit Manual.

1.15.1: Fixes the lasso selection tool, fixes crashes on iOS 12 devices, fixes thumbnail generation, and it fixes the D12 port label on Arduino Nanos

# Version 1.5 Updates

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15.2 Mar 18 This small update fixes the lasso selection tool, fixes crashes on iOS 12 devices, fixes thumbnail generation, and it fixes the D12 port label on Arduino Nanos

# Version 1.5 Updates

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15.1 Mar 16 This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15 Feb 28 1.14.2 Fixes crashes when WiFi is disabled

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14.2 04/23/2025 1.14.1 Fixes parallel capacitors.

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14.1 04/12/2025 Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14 03/27/2025 New elements:

NeoPixels and NeoMatrix
Keypad
Optocoupler
Transmission Lines
Photodiode
Power Supply Jack
Mono (TS), Stereo (TRS) and Headphone (TRRS) Jacks
PCA9685 PWM Board
EEPROMs
SCP1000 Pressure Sensor
Strain Gauges
MPU6050 Accelerometer and Gyroscope
AD5204 and AD5206 Digital Potentiometers
TSC7432 Color Light-To-Digital Converter
New capabilities:

Added the Arduino SPI library
Added the Arduino NeoPixel libraries (from Adafruit)
Added the Arduino EEPROM library
Added the Arduino Adafruit_PWMServoDriver library
Added the Arduino String library
Added the Arduino Keypad library
Photoresistor and Photodiode LED sensitivity
Series 7400 input voltages depends on VCC
Support for SPI and I2C with PIC16F877A
Support for SPI with Arduino (Master mode only)
Calculate light frequency and wavelength in LED infos
Show Internal Ports Voltages as Wires does
Persistant Arduino EEPROM memory
Fixes:

Fix PIC16F877A possible issues
Fix Internal Port bugs
Enable the Capacitor Loop warning (capacitor with no resistance) 1.13 03/31/2024 Version 1.12.2 improves subcircuits and contains all the new features and bug fixes from the big 1.12 release:

New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12.2 02/08/2023 Version 1.12.1 has bug fixes and improvements for the big 1.12 release with these new features:

New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12.1 01/28/2023 New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12 01/18/2023 • Fix relays and other complex elements when used in subcircuits
• Add IEC capacitor symbols
• Add 3.3 V Arduino option
• Add support for `sizeof`, `continue`, and `break` in C code
• Improve the scope stats to update more regularly
• Fix the alignment of the SPDT switch when rotated
• Fix lasso tool when using Apple Pencils 1.11.2 04/24/2020 • Fix the Export menu on iPads
• Choose circuit themes independently of dark/light mode of iOS
• Add an async reset option to JK flip-flops
• Add RS flip flops
• Make relays act more ideally by default
• Add optional rail ports to Op-amps
• Add circuit "lock" to prevent edits if desired
• Add Gallery to download user-submitted circuits 1.11.1 03/29/2020 • Automatically uses light or dark mode in iOS 13
• New Flip command to quickly flip elements
• Long-press to edit element properties that can be dismissed with a flick on iPhone
• New DPST and DPDT switches
• Common anode mode for the 7-segment display
• Fixes the simulation of nested subcircuits
• 555 now has ground by default
• Pin numbers on ICs
• Lots of other fixes! 1.11 03/15/2020 * NEW! Frequency measurement mode in the Scope display the Fourier transform of any signal so that you can design AC filters and monitor other repeating behaviors of your circuit
* NEW! Delete tool to make cleaning up circuits easier
* All new drawing code to make circuit animations smoother than ever
* More accurate scope with thinner lines and higher sampling rate
* New circuit browser to make sharing files with other apps easier
* Many bug fixes and and other improvements 1.10 11/16/2018 * Fixes saving circuits
* Fixes gauges that would not update
* Fixes selecting multiple elements on iPhone X 1.9.3 09/27/2018 * Fixes dragging items after editing them (missing wires, etc.)
* Fixes small capacitor simulation
* Fixes crash when using the Microphone
* Other bug fixes and improvements 1.9.2 09/13/2018 Arduino support for:
* Serial.println
* Floating point numbers
* Syntax coloring in the editor 1.9.1 08/24/2018 * All new *programmable* Arduino element (only basic programming is supported now, more on the way!)
* Added LM317 and Fuse elements
* Updated for iPhone X 1.9 06/19/2018 * Fixes a bug with the bottom toolbar disappearing

Previous changes:
* Optimized for iOS 9 and iPad Pros
* New 3D Touch preview of circuits
* New dark theme 1.8.4 01/16/2016 * Optimized for iOS 9 and iPad Pros
* New 3D Touch preview of circuits
* New dark theme 1.8.3 01/04/2016 • Fix iOS 9 crashes
• Fix creating folders and sharing circuits
• Added a Scope option to disable automatically adding the selected element to the scope 1.8.2 07/17/2015 • Fix crashes when editing values on the iPad
• Fix crashes with iCloud
• Fix crashes when exporting (sharing)

From the previous release notes:
• Addition of in-circuit gauges to always have measurements on the screen
• Addition of 6 CMOS ICs (4000, 4001, 4002, 4011, 4017, 4051, keep requesting on the uservoice!)
• Improved wire selection
• 64-bit support
• Support for iPhone 6 and 6 Plus 1.8.1 04/03/2015 • Addition of in-circuit gauges to always have measurements on the screen
• Addition of 6 CMOS ICs (4000, 4001, 4002, 4011, 4017, 4051, keep requesting on the uservoice!)
• Improved wire selection
• 64-bit support
• Support for iPhone 6 and 6 Plus 1.8 03/25/2015 • Move circuits from one storage location to another
• Duplicate, move, and delete folders
• Always show pinned tracks in the scope
• Many bug fixes and improvements from version 1.7

Updating may duplicate some of your circuits. 1.7.1 08/28/2014

Version 1.15.2

veröffentlicht am 2026-10-08

Version History This small update fixes signing into the iCircuit Gallery to upload custom elements and fixes the link to the iCircuit Manual.

1.15.1: Fixes the lasso selection tool, fixes crashes on iOS 12 devices, fixes thumbnail generation, and it fixes the D12 port label on Arduino Nanos

# Version 1.5 Updates

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15.2 Mar 18 This small update fixes the lasso selection tool, fixes crashes on iOS 12 devices, fixes thumbnail generation, and it fixes the D12 port label on Arduino Nanos

# Version 1.5 Updates

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15.1 Mar 16 This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better. 1.15 Feb 28 1.14.2 Fixes crashes when WiFi is disabled

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14.2 04/23/2025 1.14.1 Fixes parallel capacitors.

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14.1 04/12/2025 Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification 1.14 03/27/2025 New elements:

NeoPixels and NeoMatrix
Keypad
Optocoupler
Transmission Lines
Photodiode
Power Supply Jack
Mono (TS), Stereo (TRS) and Headphone (TRRS) Jacks
PCA9685 PWM Board
EEPROMs
SCP1000 Pressure Sensor
Strain Gauges
MPU6050 Accelerometer and Gyroscope
AD5204 and AD5206 Digital Potentiometers
TSC7432 Color Light-To-Digital Converter
New capabilities:

Added the Arduino SPI library
Added the Arduino NeoPixel libraries (from Adafruit)
Added the Arduino EEPROM library
Added the Arduino Adafruit_PWMServoDriver library
Added the Arduino String library
Added the Arduino Keypad library
Photoresistor and Photodiode LED sensitivity
Series 7400 input voltages depends on VCC
Support for SPI and I2C with PIC16F877A
Support for SPI with Arduino (Master mode only)
Calculate light frequency and wavelength in LED infos
Show Internal Ports Voltages as Wires does
Persistant Arduino EEPROM memory
Fixes:

Fix PIC16F877A possible issues
Fix Internal Port bugs
Enable the Capacitor Loop warning (capacitor with no resistance) 1.13 03/31/2024 Version 1.12.2 improves subcircuits and contains all the new features and bug fixes from the big 1.12 release:

New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12.2 02/08/2023 Version 1.12.1 has bug fixes and improvements for the big 1.12 release with these new features:

New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12.1 01/28/2023 New elements:
* Diac and Triac
* Varactor and Memristor
* 7401, 7403, 7409, 7411, 7412, 7413, 7415, 7418, 7419, 7420, 7421, 7422, 7424, 7425, 7426, 7427, 7428, 7433, 7434, 7435, 7436, 7439, 7442, 7443, 7444, 7447, 7449, 7450, 7451, 74L51, 7453, 74H53, 7454, 74H54, 74L54, 7455, 7456, 7457, 7458, 7460, 7464, 7465, 7470, 7471, 74H71, 7472, 7473, 7475, 7476, 7477, 7478, 74LS78, 7480, 7481, 7482, 7483, 7484, 7487, 7489, 7491, 7492, 74100, 74101, 74104, 74105, 74107A, 74108, 74109, 74110, 74112, 74113, 74114, 74116, 74118, 74125, 74126, 74128, 74131, 74132, 74133, 74134, 74135, 74136, 74138, 74139, 74140, 74170, 74224, 74244, 74245, 74540, 74541, 744067, 4006, 4008, 4009, 4010, 4012, 4013, 4014, 4015, 4016, 4018, 4019, 4020, 4021, 4022, 4023, 4024, 4025, 4026, 4027, 4028, 4030, 4031, 4032, 4038, 4040, 4041, 4042, 4043, 4044, 4049
* Servo motor
* LED Matrix
* Spark gap and tunneling diodes
* H-Bridge (L293)
* LM358 VCO
* Triode and Tetrode
* Internal Ports
* Buffer and tristate buffer
* Ten segment LED bar graph
* Internal ports
New capabilities:
* Wire colors with controllable thickness
* Over-voltage warning on ICs
* Over-power ratings on resistors
* Rotate command to quickly re-orient elements
* Support for expressions on Resistor
* Improved support for Arduino structs and arrays
* Added the Arduino Servo library
* Resistance, Frequency, RMS, PP, Min and Max Voltage measurement mode on Gauge

Fixes:
* Better contrast in the element popup editor
* Dark mode and light mode can now be automatic or manual
* Fix low Ohmic potentiometers
* Official symbol for MOSFETs 1.12 01/18/2023 • Fix relays and other complex elements when used in subcircuits
• Add IEC capacitor symbols
• Add 3.3 V Arduino option
• Add support for `sizeof`, `continue`, and `break` in C code
• Improve the scope stats to update more regularly
• Fix the alignment of the SPDT switch when rotated
• Fix lasso tool when using Apple Pencils 1.11.2 04/24/2020 • Fix the Export menu on iPads
• Choose circuit themes independently of dark/light mode of iOS
• Add an async reset option to JK flip-flops
• Add RS flip flops
• Make relays act more ideally by default
• Add optional rail ports to Op-amps
• Add circuit "lock" to prevent edits if desired
• Add Gallery to download user-submitted circuits 1.11.1 03/29/2020 • Automatically uses light or dark mode in iOS 13
• New Flip command to quickly flip elements
• Long-press to edit element properties that can be dismissed with a flick on iPhone
• New DPST and DPDT switches
• Common anode mode for the 7-segment display
• Fixes the simulation of nested subcircuits
• 555 now has ground by default
• Pin numbers on ICs
• Lots of other fixes! 1.11 03/15/2020 * NEW! Frequency measurement mode in the Scope display the Fourier transform of any signal so that you can design AC filters and monitor other repeating behaviors of your circuit
* NEW! Delete tool to make cleaning up circuits easier
* All new drawing code to make circuit animations smoother than ever
* More accurate scope with thinner lines and higher sampling rate
* New circuit browser to make sharing files with other apps easier
* Many bug fixes and and other improvements 1.10 11/16/2018 * Fixes saving circuits
* Fixes gauges that would not update
* Fixes selecting multiple elements on iPhone X 1.9.3 09/27/2018 * Fixes dragging items after editing them (missing wires, etc.)
* Fixes small capacitor simulation
* Fixes crash when using the Microphone
* Other bug fixes and improvements 1.9.2 09/13/2018 Arduino support for:
* Serial.println
* Floating point numbers
* Syntax coloring in the editor 1.9.1 08/24/2018 * All new *programmable* Arduino element (only basic programming is supported now, more on the way!)
* Added LM317 and Fuse elements
* Updated for iPhone X 1.9 06/19/2018 * Fixes a bug with the bottom toolbar disappearing

Previous changes:
* Optimized for iOS 9 and iPad Pros
* New 3D Touch preview of circuits
* New dark theme 1.8.4 01/16/2016 * Optimized for iOS 9 and iPad Pros
* New 3D Touch preview of circuits
* New dark theme 1.8.3 01/04/2016 • Fix iOS 9 crashes
• Fix creating folders and sharing circuits
• Added a Scope option to disable automatically adding the selected element to the scope 1.8.2 07/17/2015 • Fix crashes when editing values on the iPad
• Fix crashes with iCloud
• Fix crashes when exporting (sharing)

From the previous release notes:
• Addition of in-circuit gauges to always have measurements on the screen
• Addition of 6 CMOS ICs (4000, 4001, 4002, 4011, 4017, 4051, keep requesting on the uservoice!)
• Improved wire selection
• 64-bit support
• Support for iPhone 6 and 6 Plus 1.8.1 04/03/2015 • Addition of in-circuit gauges to always have measurements on the screen
• Addition of 6 CMOS ICs (4000, 4001, 4002, 4011, 4017, 4051, keep requesting on the uservoice!)
• Improved wire selection
• 64-bit support
• Support for iPhone 6 and 6 Plus 1.8 03/25/2015 • Move circuits from one storage location to another
• Duplicate, move, and delete folders
• Always show pinned tracks in the scope
• Many bug fixes and improvements from version 1.7

Updating may duplicate some of your circuits. 1.7.1 08/28/2014 • New design for iOS 7
• Added iCloud and Dropbox storage to seamlessly share circuits between devices
• Added filter buttons to the library to help locate elements
• Fixes scope crashes on iPhone
• New antenna (AM and FM) and crystal oscillator elements
• Numerous bug fixes and enhancements 1.7 08/14/2014

Version 1.15.2

veröffentlicht am 2026-03-18

This small update fixes signing into the iCircuit Gallery to upload custom elements and fixes the link to the iCircuit Manual.

1.15.1: Fixes the lasso selection tool, fixes crashes on iOS 12 devices, fixes thumbnail generation, and it fixes the D12 port label on Arduino Nanos

# Version 1.5 Updates

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better.

Version 1.15

veröffentlicht am 2026-02-28

This major update brings powerful new analysis tools, expanded microcontroller support, and numerous improvements.

## Bode Plot Analysis

Unlock frequency response analysis with new Bode plot capabilities! Visualize how your circuits respond across frequencies with magnitude and phase plots. Perfect for analyzing filters, amplifiers, and frequency-dependent circuits. See cutoff frequencies, gain characteristics, and phase relationships at a glance.

## Expanded Microcontroller Support

- **Arduino Mega** - Build bigger projects with 54 digital I/O pins and 16 analog inputs
- **Arduino Nano** - Compact board ideal for small-scale applications
- **ESP32 and ESP8266** - Enhanced support for popular IoT microcontrollers

## New Circuit Elements

- **AC Motor** - Single phase AC induction motor
- **Barrel Connector** - Professional DC power jack for your circuits with configurable shunt terminal
- **Improved Power Supply Jack** with better connection handling

## Quick Search

Find circuit elements faster than ever! New search bar lets you instantly locate components without scrolling through categories. Just start typing and get to building.

## Voltage Monitoring

Protect your circuits with automatic under-voltage and over-voltage warnings. Get notified when components are operating outside their safe voltage ranges, helping prevent damage to sensitive ICs and ensuring reliable operation.

## Element Library Organization
- New Microcontroller category for better organization
- Improved element filtering options
- Elements sorted by Pro availability for easier discovery

## Bug Fixes

- Fixed photodiode and photoresistor light source selection
- Removed false capacitor loop errors that prevented valid circuits from running
- Added input voltage tolerance for digital ICs to prevent spurious warnings from minor voltage fluctuations
- Better handling of Arduino EEPROM and multiple board types

Thank you for your continued support! Whether you're learning electronics, prototyping professional designs, or just having fun building circuits, we hope v1.15 makes your experience even better.

Version 1.14.2

veröffentlicht am 2025-04-23

1.14.2 Fixes crashes when WiFi is disabled

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification

Version 1.14.2

veröffentlicht am 2025-04-23

Apr 23, 2025
Version 1.14.2
1.14.2 Fixes crashes when WiFi is disabled

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification

Version 1.14.1

veröffentlicht am 2025-04-12

Apr 12, 2025
Version 1.14.1
1.14.1 Fixes parallel capacitors.

Here are the 1.14 release notes:

Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification

Version 1.14

veröffentlicht am 2025-03-27

Mar 27, 2025
Version 1.14
Improved element and wire selection.

New elements:
* RGB Led
* 74HC4551 Analog Multiplexer and Demultiplexer
* Custom Element

New capabilities:
* Added the capability to create Custom Elements in an Arduino like way
* Added the capability to add resistors, inductors and capacitors to the Custom Elements
* Added the capability to use SPI bus with Custom elements
* Added the capability to draw shapes over the chip and create animations using the drawing functions in the Custom Elements
* Added the capability to save persistan data through an EEPROM with the Custom Elements
* Added the capability of login to the Gallery directly into the application
* Upload Custom Elements to the Gallery directly from the application
* Create and upload Custom Element revisions directly to the Gallery
* Pull Custom Element revisions from the Gallery directly into the application

Custom Elements:
Fixes:
* SPI disconnections when a modification
* I2C disconnections when a modification

Version 1.13

veröffentlicht am 2024-03-31

Mar 31, 2024
Version 1.13
New elements:

NeoPixels and NeoMatrix
Keypad
Optocoupler
Transmission Lines
Photodiode
Power Supply Jack
Mono (TS), Stereo (TRS) and Headphone (TRRS) Jacks
PCA9685 PWM Board
EEPROMs
SCP1000 Pressure Sensor
Strain Gauges
MPU6050 Accelerometer and Gyroscope
AD5204 and AD5206 Digital Potentiometers
TSC7432 Color Light-To-Digital Converter
New capabilities:

Added the Arduino SPI library
Added the Arduino NeoPixel libraries (from Adafruit)
Added the Arduino EEPROM library
Added the Arduino Adafruit_PWMServoDriver library
Added the Arduino String library
Added the Arduino Keypad library
Photoresistor and Photodiode LED sensitivity
Series 7400 input voltages depends on VCC
Support for SPI and I2C with PIC16F877A
Support for SPI with Arduino (Master mode only)
Calculate light frequency and wavelength in LED infos
Show Internal Ports Voltages as Wires does
Persistant Arduino EEPROM memory
Fixes:

Fix PIC16F877A possible issues
Fix Internal Port bugs
Enable the Capacitor Loop warning (capacitor with no resistance)

Haftungsausschluss


Offizieller App Store-Link


Wir hosten iCircuit nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.

Der App-Store-Link für iCircuit wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.

Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.





Klicken Sie auf Sterne, um diese APP zu bewerten!

Nutzerbewertung:
  0.0/5     0
Downloads: 0
Aktualisiert am: 2026-11-16
Betriebssystem: iOS
Lizenztyp: Paid

TOP-DOWNLOADS
letzte Woche in Bildung & Erziehung